Tag: The Peacock

The Peacock has been on the design wall and I am not as excited as I was. I thought that it would be quite exciting, but I am not excited now. I am trying not to take down all the blocks and put it away, though I do think that is a very real possibility.

Still I am happy with the basic layout. I think the blocks need some space between them, but I don’t think I have it in me to cut up strips of fabric to put between each block.

I thought that perhaps I would add a Peaky to each block and make them in squares. That means I could put the blocks together with a little space between them. I put a piece of a solid behind a couple of the blocks to see what it looked like. It is hard to see what the whole piece would look like, but even still I don’t really like the look.

I think I’ll just sew the piece together, basically as shown, and be done with it.

As I said yesterday, I finished the binding and back of the Food Quilt #3 and it is ready to go to the quilter. The top was already finished. I was trying to decide what project to work on next when I realized that I wanted to look at the blocks and projects I had been working. I started putting all of the projects up on the design wall and taking a look at them.

Pulling out a bunch of projects and putting a zillion blocks up on the design wall is a lot of work. I am exaggerating. None of my projects have a zillion blocks, though the Peacock and the Octagon 9 Patch do have a lot.

I could spend all week going through the projects with you until I made a “big reveal” and told you what I would work on, but I think you should know immediately that the Peacock blocks excited me most when I put them up on the wall. I am not sure why. Perhaps my eye is liking the dark colors?

I also realized that this is the first time I have seen these quilt blocks on the design wall.

The above photo shows a pretty raw layout, but not terrible either. I am still in that gradation mode, so I put the darker blocks towards the bottom. I don’t have a lot of the small blocks, so they will make an asymmetrical border.

I only have a couple of solid blocks, which I talked about adding as tests. The lavender definitely doesn’t work in the current location. I kind of like the way the top of the quilt (without the small border blocks) is not straight. That begs the question of what I would put to make the edges straight. I am definitely not making an edge like that.

My other immediate thought upon stepping back was that the gradation was nice, but that blocks needed a bit of space between them. I might be backing off that thought, but I will put some black behind and in between the blocks to see.

This quilt requires more work, so I may quilt one of my projects while I look at it, try things and rearrange.

 

I have no idea if this is the last of the blocks. They seem to multiply when I am not looking, so I expect more to turn up.

I do have some pieces left, but they are not in sets for blocks. I had one extra from each block. I think I could match up some of them, but I don’t really know how many will look good enough to include. Thus, I don’t know if I will use them, but we will see.

I made some solid blocks as tests. I don’t know if I will use them in the quilt, but we will see. I’ll have to layout the piece first and see if the solids can fit somewhere.

The change to Daylight Saving Time is a nightmare. What a dumb idea or an idea whose time has passed. I changed the clock by my bed the night before so when I woke up, I saw that it was already later than usual. For some reason I felt awful. It might have been the dread of knowing that I had lost an hour. I got up and got some caffeine and went up to my workroom.

I needed to just sew, so I looked at the projects I had that were at the rote sewing stage. After a very short deliberation, I pulled out the Peacock blocks and started sewing.

I don’t remember how many sets I cut up at the Retreat, but the prep I did there allowed me to just sew pieces and parts together. I now have about 40 blocks. When I say blocks, I mean two halves of blocks because I can’t sew the pieces of the blocks together until I lay out the entire quilt. Once I lay it out, I will sew it together in rows.

It was great to just sew. I only had to sew straight seams. I didn’t have to make a lot of decisions beyond how to press the seams and the stack of blocks got bigger and bigger.

I wanted to do more, but don’t I always? That was the kind of sewing that I needed. I finally feel like I am making progress.

I realize that I have not discussed the One Block Wonder/Peacock quilt recently. The last time I talked about it was last June!!! I can’t believe so much time has passed.

Frankly, I was stuck and needed some hand holding. This is the main reason I get stuck on projects. Since Pam is in Atlanta, though very willing to help via email, I set up a date with Maureen to work through my issues at the Retreat.

TA DAH! The peacock project is finally moving forward. During the time  I spent with Maureen at the Retreat she talked me back from the ledge with regard to cutting up my panels.

I had read the One Block Wonder book, but being shown is different than reading. This technique is definitely a challenge to learn from a book. The technique is based on repeats, but since panels are panels, I decided that each of my panels would be one repeat. This worked out pretty well.

I had decided on a width for the strips with Pam’s guidance (3.75″, in case you are curious), so with Maureen’s help, I lined up the panels and eventually began cutting. It was good to do this at the Retreat, because we had big tables. I know now that I would not have been able to do this cutting in my workroom.

My panels were about 24″ x 44″. I had to lay out the complete panel flat and there are 6 layers stacked on top of each other after you have lined them up according to the directions in the book. It was helpful to have the big table. I put new blade in my rotary cutter and that was helpful. I only had a 45mm cutter. A 60mm cutter would have been very useful, but nobody had one to lend.

The key piece of helpful information during the cutting process was that there was a little wiggle room if I didn’t cut the panels quite right. One of my panels was not printed like the others and was causing me problems. Maureen’s comment helped me relax knowing that everything would be ok.

Another very helpful piece of info, which relates to wiggle room, was that the cut edge of the panel could be squared up before the next cut. The maker cuts through 6 layers of fabric, which is difficult in any case, but even more difficult when juggling a ruler, a big table you can’t reach across all with spectators watching. I had enough leftover to square the edges, but not enough to make another set of full sized blocks.

I did take what was leftover and make some smaller triangles that I will perhaps sprinkle around the edge.

Each set of triangles is pinned together waiting for its turn under the machine. Some of them look like they will make really interesting blocks. Others are mostly black and may not make it into the quilt.

I also have a number of solids that coordinate with the panel and I may sprinkle those throughout the the quilt. I’ll have to see.

I did start to sew blocks together after cutting them up, but I have not yet made very much progress. I had to try each one to see how I wanted to sew it together. Because you are essentially using triangles, there are three layout options for each block.

The above blocks are some samples. They look a little strange, because they are not sewn into hexagons. Three triangles are sewn together, two sets for each hexagon, then they are pinned together until the layout is finalized when all the blocks are sewn together in rows. I could sew the hexagons together and sew them using set in seams, but I am still not over Attack of the Hexies and I don’t want to go there again just yet.

Yes, I did save a panel to use for part of the back.

I am still a bit scattered with my projects. This will be a good leaders and enders project when I don’t have others ahead of it in line.